Skip to content

Definition of oblique drawing

  1.  a projective drawing of which the frontal lines are given in true proportions and relations and all others at suitable angles other than 90 degrees without regard to the rules of linear perspe
  2. ‘Cabinet Oblique’
    In Cabinet obliquethe scale (depth) is halved whilst in Cavalier
    oblique the depth scale is the same as in the X and Y directions.
  3. One remaining drawing conventions is Oblique drawing –In this convention the angles used are 45 degrees and 90 degrees.  The only difference between the two named styles is in the scale of the dimension going away from the viewer.
    This first example is Cavalier Obliqueand shows the full scale (1:1) in the axis.
  4. This drawing (shown to the left) is symmetric about the horizontal centre-line.Centre-lines are chain-dotted and are used for symmetric objects, and also for  showing the centre of circles and holes.
    Drawing dimensions should generally be done directly to the centre-line, as shown on the left.   In many cases this method
    can be clearer than just dimensioning
    between surfaces.

    Note again that the measurements show only numbers.  The statement at the bottom of the drawing identifies that these numbers are the dimensions in Millimetres.

  5. A Simple Guide to Dimensions … Continued …With the left side of the block composed solely of  “radiuses” (radii)  – as shown here, we break our rule that we should not duplicate dimensions. The total length is known because the radius of the curve on the left side is given.  Then, for clarity, we add the overall length of  60 and we note that it is a reference (REF)  dimension.
    This means that it is not really required.

    Somewhere on the paper, usually the bottom, there should be placed information on what measuring system is being used    (e.g. inches and millimetres) and also the scale of the drawing.

 

Question:

  1. Define oblique drawing
  2. Draw oblique block

 

See also

Drawing Practices

Processing of Ceramics and Glass

Metal Processing

Processing of wood

Processing Wood

Leave a Reply

Your email address will not be published. Required fields are marked *